SaltDogg Spreaders
From
100 lb. up to 16 yd. capacity, from manual walk-behind
to
electric drive, gas powered or hydraulic drive.
Tailgate
The
most cost-effective high quality tailgate spreaders in the industry.
Model |
TGSUV1B |
TGSUVPROA |
TGS02 |
TGS01B |
TGS03 |
TGS05B |
TGS06 |
TGS07 |
Capacity |
4.4 cu ft. |
4.4 cu. ft. |
3.0 cu. ft. |
8 cu. ft. |
8 cu. ft. |
10.79 cu ft. |
10 cu. ft. |
11 cu. ft. |
Chute |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
Construction |
Poly Hopper/Steel Frame |
Poly Hopper/Steel Frame |
Poly Hopper/Steel Frame |
Poly/Steel |
Poly/Steel |
Poly Hopper/Steel Frame |
Poly Hopper/Steel Frame |
Poly Hopper | Steel Frame |
Controller |
ON/OFF |
Variable Speed | Vibrator Switch |
Variable Speed | Vibrator Switch |
Variable Speed |
Variable Speed Vibrator Switch |
Variable Speed | Vibrator Switch |
Variable Speed | Vibrator Switch |
Variable Speed | Vibrator Switch |
Cover |
Fitted Polymer Lid |
Fitted Polymer Lid |
Fitted Polymer Lid |
Fitted Polymer Lid |
Fitted Polymer Lid |
Fitted Polymer Lid |
Hinged Polymer Lid |
Dual Action Polymer Lid |
Feed Mechanism |
manual open/close gate w/gravity feed |
gravity feed w/ vertical 12 VDC auger assist |
Horizontal Auger Feed |
gravity feed w/ vertical 12 VDC auger assist |
Horizontal Auger Feed |
gravity feed w/ vertical 12 VDC auger assist |
manual open/close gate w/gravity feed |
Horizontal Auger Feed |
Hopper Dimensions |
40.5" x 22.5"x 20.5" |
22.5"x 22.25" x 31.25" |
31.5" x 30.9"x21.5" |
45.7" x 29.7"x 30.3" |
45" x 38"x 30" |
40.1" x 54.3"x 27.3" |
40" x 63"x 27" |
46" x 53"x 31.5" |
Hopper Length |
19" |
19" |
18.3" |
26" |
28" |
23" |
26.9" |
26" |
Hopper Width |
21" |
21" |
30" |
26" |
38" |
52.25" |
52" |
51" |
Ideal Use |
Residential |
Residential/Light Commercial |
Light Commercial |
Commercial |
Commercial |
Commercial |
Commercial |
Commercial |
Overall Height |
40.5" |
40.5" |
31.5" |
45.7" |
45" |
40.1" |
40" |
46" |
Overall Width |
22.5" |
22.5" |
30.9" |
29.7" |
38" |
54.3" |
63" |
53" |
Power Source |
12V DC |
12V DC |
12V DC |
12V DC |
12V DC Dual Shaft Gear Motor |
12V DC |
12V DC |
12V DC Dual Shaft Gear Motor |
Spinner |
9" Poly |
9" Poly |
12" Poly |
9" |
12" |
9" Poly |
9" Poly |
12" Poly |
Spreading Material |
#1 Rock Salt or similar material |
#1 Rock Salt or similar material |
Ice melt, Bagged salt |
#1 Rock Salt or similar material |
Bulk Salt; 50/50 Salt/Sand mix |
#1 Rock Salt or similar material |
#1 Rock Salt or similar material |
Bulk Salt; 50/50 Salt/Sand mix |
Spreading Width |
14' |
3'-30' |
3'-30' |
3-30 ft. |
3-30 ft. |
3'-30' |
3'-30' |
3'-30' |
Top Screen |
NO |
NO |
N/A |
N/A |
N/A |
NO |
NO |
YES |
Vehicle Application |
SUV, ½ Ton, &
¾ Ton Trucks |
SUV, ½ Ton, &
¾ Ton Trucks |
SUV,½ Ton,
¾ Ton and 1Ton Trucks |
½ Ton, &
¾ Ton Trucks |
½ Ton, &
¾ Ton Trucks |
¾ Ton & 1Ton Trucks |
¾ Ton & 1-Ton Trucks |
¾ Ton & 1Ton Trucks |
Vibrator |
OPTIONAL |
OPTIONAL |
OPTIONAL |
N/A |
Optional (3020340) |
OPTIONAL |
YES |
YES |
.75 to
2 yd. Electric Drive Poly Hopper
Spreading Material: Bulk Salt;
50/50 Salt/Sand mix
Model |
SHPE0750 |
SHPE1000 |
SHPE1500 |
SHPE2000 |
PRO2000 |
PRO2000CH |
Capacity |
0.75 cu. yds. |
1.0 cu. yds |
1.5 cu. yds. |
2 cu. yds. |
2.0 cu. yds. |
2.0 cu. yds. |
Chute |
Standard |
Standard |
Standard |
Standard |
Adjustable, Side Swing |
Adjustable, Side Swing |
Construction |
Polyethylene, Black |
Polyethylene, Black |
Polyethylene, Black, Red, Yellow |
Polyethylene, Black, Red, Yellow |
Polyethylene, Black |
Polyethylene, Black |
Controller |
Variable Speed Vibrator Switch |
Variable Speed Vibrator Switch |
Variable Speed |
Variable Auger Speed | Variable Spinner Speed | Vibrator Switch |
Utility Light Output |
120A PWM DC |
120A PWM DC |
Cover |
HD Poly-Vinyl Tarp |
HD Poly-Vinyl Tarp |
HD Poly-Vinyl Tarp |
HD Poly-Vinyl Tarp |
HD Poly-Vinyl Tarp |
HD Poly-Vinyl Tarp |
Feed Mechanism |
2.5" Stainless Steel Auger & Trough |
2.5" Stainless Steel Auger & Trough |
2.5" Stainless Steel Auger & Trough |
2.5" Stainless Steel Auger & Trough |
5.25" Carbon Steel Variable Pitch Auger, Stainless Trough |
12" Wide Steel Pintle Chain Conveyor |
Hopper Dimensions |
53" x 48" x 28" |
68" x 48" x 34" |
87.5" x 51" x 38" |
96" x 48" x 40" |
96" x 48" x 44.3" |
96" x 48" x 44.3" |
Hopper Length |
53" |
68" |
87.3" |
96" |
96" |
96" |
Hopper Width |
48" |
48" |
50.5" |
47.8" |
48" |
48" |
Ideal Use |
Residential/Light Commercial |
Medium & Heavy-Duty Commercial |
Medium & Heavy-Duty Commercial |
Medium & Heavy-Duty Commercial |
Medium & Heavy-Duty Commercial |
Medium & Heavy-Duty Commercial |
Overall Height |
28" |
34" |
38" |
40" |
44.3" |
44.3" |
Overall Width |
48" |
48" |
50.5" |
47.8" |
- |
- |
Power Source |
(2) 12V DC direct drive |
(2) 12V DC direct drive |
(2) 12V DC direct drive |
(2) 12V DC direct drive |
Two 12 VDC direct drive motors (3/4 HP for auger, 1/2 HP for spinner)
|
Two 12 VDC direct drive motors |
Spinner |
14" |
14" |
14" |
14" Poly |
14" Poly |
14" Poly |
Spreading Material |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Spreading Width |
5-30 ft. |
5-30 ft. |
5-30 ft. |
5'-30' |
5'-30' |
5'-30' |
Top Screen |
¼" Black Powder Coated Steel |
¼" Black Powder Coated Steel |
¼" Black Powder Coated Steel |
YES |
YES |
YES |
Vehicle Application |
Utility Vehicle, ¼ Ton,
½ Ton,
¾ Ton Trucks |
Utility Vehicle, ¼ Ton,
½ Ton,
¾ Ton Trucks |
¾ Ton & 1Ton Trucks |
1Ton Trucks (above 10,000 lbs. GVW) |
1Ton Trucks, >10,000 lb GVW |
1Ton Trucks, >10,000 lb GVW |
Vibrator |
Standard (200 force lbs.) |
Standard (200 force lbs.) |
Standard (200 force lbs.) |
YES |
200lb. Vibrator included |
200lb. Vibrator included |
2.5 to
6 yd. Electric Drive Poly Hopper
Spreading Material: Bulk Salt;
50/50 Salt/Sand mix
Model |
SHPE2500 |
SHPE2500CH |
SHPE3000 |
SHPE3000CH |
SHPE4000 |
SHPE6000 |
Capacity |
2.5 cu. yds. |
2.5 cu. yds. |
3 cu. yds. |
3 cu. yds. |
4 cu. yds. |
6 cu. yds. |
Chute |
Adjustable, Side Swing |
Adjustable, Side Swing |
Adjustable |
Adjustable |
Standard |
Standard |
Construction |
Polyethylene, Black |
Polythylene, Black |
Polyethylene |
Polyethylene |
Polyethylene |
Polyethylene |
Controller |
120A PWM DC |
120A PWN DC |
120A High Power | Variable Auger Speed | Variable Spinner Speed |
Vibrator Switch | Utility Light Output |
Variable Speed |
120A High Power | Variable Auger Speed | Variable Spinner Speed |
Vibrator Switch | Utility Light Output |
120A High Power | Variable Auger Speed | Variable Spinner Speed |
Vibrator Switch | Utility Light Output |
Cover |
HD Poly-Vinyl Tarp |
HD Poly-Vinyl Tarp |
Interlocking double doors |
Interlocking double doors |
N/A |
N/A |
Feed Mechanism |
5.25" Carbon Steel Variable Pitch Auger, Stainless Trough |
12" Wide all steel pintle chain conveyor |
6" Carbon Steel Auger, Stainless Steel Trough |
12"W Conveyor Chain |
5.5" Carbon Steel Auger, Stainless Steel Trough |
6" Carbon Steel Auger, Stainless Steel Trough |
Hopper Dimensions |
114.2" x 48" x 44.3" |
114.2" x 48" x 44.3" |
124" x 50" x 53" |
124" x 50" x 53" |
100" x 74" x 43" |
127" x 77" x 57" |
Hopper Length |
114.2" |
114.2" |
114" |
114" |
99.5" |
127" |
Hopper Width |
48" |
48" |
48" |
48" |
74" |
77" |
Ideal Use |
Medium & Heavy-Duty Commercial |
Medium & Heavy-Duty Commercial |
Medium & Heavy-Duty Commercial |
Medium & Heavy-Duty Commercial |
Medium & Heavy-Duty Commercial |
Medium & Heavy-Duty Commercial |
Overall Height |
44.3" |
52.7" |
52.7" |
52.7" |
43.5" |
57" |
Overall Width |
- |
48" |
49.6" |
49.6" |
74" |
77" |
Power Source |
Two 12 VDC direct drive motors (¾ HP for auger,
½ HP for spinner)
|
Two 12 VDC direct drive motors (¾ HP for auger,
½ HP for spinner)
|
(2) 12V DC direct drive |
(2) 12V DC direct drive |
(2) 12V DC direct drive |
(2) 12V DC direct drive |
Spinner |
14" Poly |
14" poly with adjustable stainless steel spinner shield |
14" Poly |
14" |
14" Poly |
14" Poly |
Spreading Material |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Spreading Width |
5'-30' |
- |
5'-40' |
5-30 ft. |
5'-40' |
5'-40' |
Top Screen |
YES |
YES |
YES |
(2) ¼" Black Powder Coated Steel |
YES |
YES |
Vehicle Application |
Minimum GVW of 13,000 lbs. |
Minimum GVW of 13,000 lbs. |
13,000 lbs GVW and above |
13,000 lbs GVW and above |
15,000 lbs GVW and above |
Minimum GVW of 25,999 lbs. |
Vibrator |
200lb. Vibrator included |
200lb. Vibrator included |
YES |
N/A |
YES |
YES |
Electric Drive Stainless Hopper
1.5 - 2
yards, Spreading Material: Bulk Salt; 50/50 Salt/Sand mix
Model |
1400601SS |
1400701SS |
Capacity |
2.0 cu. yds. |
1.5 cu. yds. |
Chute |
Adjustable |
Adjustable |
Construction |
Stainless Steel |
Stainless Steel |
Controller |
120A High Power | Variable Auger Speed | Variable Spinner Speed |
Vibrator Switch | Utility Light Output |
Variable Speed Vibrator Switch |
Cover |
Optional |
Optional |
Feed Mechanism |
12"W Conveyor Chain |
12"W Conveyor Chain |
Hopper Dimensions |
89" x 47" x 33" |
113" x 47" x 33" |
Hopper Length |
96" |
72" |
Hopper Width |
47" |
47" |
Ideal Use |
Medium & Heavy-Duty Commercial |
Medium & Heavy-Duty Commercial |
Overall Height |
32.1" |
32.1" |
Overall Width |
47" |
47" |
Power Source |
(2) 12V DC direct drive |
(2) 12V DC direct drive |
Spinner |
14" Poly |
14" |
Spreading Material |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Spreading Width |
5'-40' |
2-30 ft. |
Top Screen |
YES |
1/4" Black Powder Coated Steel |
Vehicle Application |
¾ Ton & 1Ton Trucks |
¾ Ton & 1Ton Trucks |
Vibrator |
N/A |
N/A |
Gas
Hopper
Available in stainless
steel, powder coated carbon steel or rotationally molded polymer, these slide-in
hopper spreaders are powered by a 10.5 HP gas engine.
Which Gas Drive Hopper
Spreader Will Work For You? SPREADERS KITS (kits include Spreader, Inverted "V",
and Top Screen).
Model |
1400050 |
1400050SS |
1400100 |
1400100SS |
1400200SS |
1400250SS |
1400300SS |
1400350SS |
1400450 |
1400400 |
Capacity |
2 cu. yds. |
2 cu. yds. |
2 cu. yds. |
2 cu. yds. |
1.5 cu. yds. |
1.5 cu. yds. |
2.5 cu. yds. |
2.5 cu. yds. |
2 cu. yds. |
2 cu. yds. |
Chute |
Standard |
Standard |
Extended |
Extended |
Standard |
Extended |
Standard |
Extended |
Extended |
Standard |
Construction |
Carbon Steel |
Stainless Steel |
Carbon Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Polymer |
Polymer |
Controller |
In-Cab Control Console |
In-Cab Control Console |
In-Cab Control Console |
In-Cab Control Console |
In-Cab Control Console |
In-Cab Control Console |
In-Cab Control Console |
In-Cab Control Console |
In-Cab Control Console |
In-Cab Control Console |
Cover |
Optional |
Optional |
Optional |
Optional |
Optional |
Optional |
Optional |
Optional |
Optional |
Optional |
Feed Mechanism |
12"W Conveyor Chain |
12"W Conveyor Chain |
12"W Conveyor Chain |
12"W Conveyor Chain |
12"W Conveyor Chain |
12"W Conveyor Chain |
12"W Conveyor Chain |
12"W Conveyor Chain |
12"W Conveyor Chain |
12"W Conveyor Chain |
Hopper Dimensions |
113" x 47" x 32.5" |
113" x 47" x 32.5" |
113" x 47" x 32.5" |
113" x 47" x 32.5" |
89" x 47" x 32.5" |
89" x 47" x 32.5" |
137" x 47" x 32.5" |
137" x 47" x 32.5" |
113" x 47" x 32.5" |
113" x 47" x 32.5" |
Hopper Length |
96" |
96" |
96" |
96" |
72" |
72" |
120" |
120" |
95.5" |
95.5" |
Hopper Width |
47" |
47" |
47" |
47" |
47" |
47" |
47" |
47" |
47" |
47" |
Ideal Use |
Medium & Heavy-Duty Commercial |
Medium & Heavy-Duty Commercial |
Medium & Heavy-Duty Commercial |
Medium & Heavy-Duty Commercial |
Medium & Heavy-Duty Commercial |
Medium & Heavy-Duty Commercial |
Medium & Heavy-Duty Commercial |
Medium & Heavy-Duty Commercial |
Medium & Heavy-Duty Commercial |
Medium & Heavy-Duty Commercial |
Overall Height |
32.1" |
32.1" |
32.1" |
32.1" |
32.1" |
32.1" |
32.1" |
32.1" |
35" |
35" |
Overall Width |
47" |
47" |
47" |
47" |
47" |
47" |
47" |
47" |
47" |
47" |
Power Source |
10.5 HP Briggs & Straton Intek Gas Engine |
10.5 HP Briggs & Straton Intek Gas Engine |
10.5 HP Briggs & Straton Intek Gas Engine |
10.5 HP Briggs & Straton Intek Gas Engine |
10.5 HP Briggs & Straton Intek Gas Engine |
10.5 HP Briggs & Straton Intek Gas Engine |
10.5 HP Briggs & Straton Intek Gas Engine |
10.5 HP Briggs & Straton Intek Gas Engine |
10.5 HP Briggs & Straton Intek Gas Engine |
10.5 HP Briggs & Straton Intek Gas Engine |
Spinner |
12.5" |
12.5" |
12.5" |
12.5" |
12" |
12" |
12" |
12" |
12.5" |
12.5" |
Spreading Material |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Spreading Width |
2-30 ft. |
2-30 ft. |
2-30 ft. |
2-30 ft. |
2-30 ft. |
2-30 ft. |
2-30 ft. |
2-30 ft. |
2-30 ft. |
2-30 ft. |
Top Screen |
¼" Black Powder Coated Steel |
¼" Black Powder Coated Steel |
¼" Black Powder Coated Steel |
¼" Black Powder Coated Steel |
¼" Black Powder Coated Steel |
¼" Black Powder Coated Steel |
¼" Black Powder Coated Steel |
¼" Black Powder Coated Steel |
¼" Black Powder Coated Steel |
¼" Black Powder Coated Steel |
Vehicle Application |
¾ Ton & 1Ton Trucks |
¾ Ton & 1Ton Trucks |
¾ Ton & 1Ton Trucks |
¾ Ton & 1Ton Trucks |
¾Ton & 1Ton Trucks |
¾ Ton & 1Ton Trucks |
10ft Flatbed or Dump Trucks |
10' Flatbed or Dump Trucks |
¾ Ton & 1Ton Trucks |
¾ Ton & 1Ton Trucks |
Vibrator |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/ |
2.5-3.0
CU YD Mid-Size
Spread Material: bulk salt, bulk
sand, salt & sand mix
Feed Mechanism: 14-1/2" wide conveyor chain
with 1/4" crossbars
Power Source: gasoline, electric, or hydraulic
-
Capacity:
2.5 cu. yds. (8'), 2.75 cu. yds. (9'), 3.0 cu. yds. (10'), )
-
304
stainless steel hopper
-
Adjustable Feedgate
-
Available
with 10-1/2 HP gas engine, 2 independent electric motors, or 2 independent
hydraulic motors
-
14½"
wide conveyor chain with ¼" crossbars
-
Spinner
chute has two adjustable internal baffles
-
4 Hinged
top screens, ¼" bars
-
Inverted
V
-
Bolt-on
spinner housing18" Spinner disc
Model |
1400455SS |
1400455SSE |
1400455SSH |
1400460SS |
1400460SSE |
1400460SSH |
1400465SS |
1400465SSE |
1400465SSH |
Capacity |
2.5 cu. yds. |
2.5 cu. yds. |
2.5 cu. yds. |
2.75 cu. yds. |
2.75 cu. yds. |
2.75 cu. yds. |
3.0 cu. yds. |
3.0 cu. yds. |
3.0 cu. yds. |
Chute |
Adjustable |
Adjustable |
Adjustable |
Adjustable |
Adjustable |
Adjustable |
Adjustable |
Adjustable |
Adjustable |
Construction |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Controller |
In cab |
In cab |
In cab |
In cab |
In cab |
In cab |
In cab |
In cab |
In cab |
Cover |
- |
- |
- |
- |
- |
- |
- |
- |
- |
Feed Mechanism |
14.5"W Conveyor Chain |
14.5"W Conveyor Chain |
14.5"W Conveyor Chain |
14.5"W Conveyor Chain |
14.5"W Conveyor Chain |
14.5"W Conveyor Chain |
14.5"W Conveyor Chain |
14.5"W Conveyor Chain |
14.5"W Conveyor Chain |
Hopper Dimensions |
- |
- |
- |
- |
- |
- |
- |
- |
- |
Hopper Length |
96" |
96" |
96" |
108" |
108" |
108" |
119" |
119" |
120" |
Hopper Width |
115.9" |
121.5" |
121.8" |
126.9" |
132.5" |
132.8" |
138.9" |
138.4" |
141.8" |
Ideal Use |
Municipal & Commercial |
Municipal & Commercial |
Municipal & Commercial |
Municipal & Commercial |
Municipal & Commercial |
Municipal & Commercial |
Municipal & Commercial |
Municipal & Commercial |
Municipal & Commercial |
Overall Height |
37.6" |
38" |
37.6" |
37.6" |
37.6" |
37.6" |
38" |
37.6" |
38" |
Overall Width |
58" |
58" |
58" |
58" |
58.0" |
58" |
37.6" |
38.0" |
37.6" |
Power Source |
Gas Engine |
Gas Engine |
2 Independent Hydraulic Motors |
Gas Engine |
Electric Motor |
2 Independent Hydraulic Motors |
Gas Engine |
Electric Motor |
Electric Motor |
Spinner |
18" |
18" |
18" |
18" |
18" |
18" |
18" |
18" |
18" |
Spreading Material |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Spreading Width |
4'-30' |
4'-40' |
- |
4-30 ft. |
4-30 ft. |
4-30 ft. |
4-30 ft. |
4'-30' |
4-30 ft. |
Top Screen |
¼" Black Powder Coated Steel |
¼" Black Powder Coated Steel |
¼" Black Powder Coated Steel |
¼" Black Powder Coated Steel |
¼" Black Powder Coated Steel |
¼" Black Powder Coated Steel |
¼" Black Powder Coated Steel |
¼" Black Powder Coated Steel |
¼" Black Powder Coated Steel |
Vehicle Application |
Minimum GVW of 15,000 lbs. |
Minimum GVW of 15,000 lbs. |
Minimum GVWR 15,000 lbs |
Minimum GVWR 15,000 lbs |
Minimum GVWR 15,000 lbs |
Minimum GVWR 15,000 lbs |
Minimum GVWR 15,000 lbs |
Minimum GVWR 15,000 lbs |
Minimum GVWR 15,000 lbs |
Vibrator |
3013659 |
3013659 |
3013659 |
3013659 |
3013659 |
3013659 |
3013659 |
3013659 |
3013659 |
3.5 – 4.5 Cubic Yard
Spread Material: bulk salt, bulk
sand, salt & sand mix
Feed Mechanism: 14-1/2" wide conveyor chain
with 1/4" crossbars
Power Source: gasoline or
hydraulic
-
Capacity: 3.5 cu. yds. (8'), 4.0 cu. yds. (9'), 4.5 cu. yds. (10')
-
304
stainless steel hopper
-
Adjustable Feedgate
-
Available with 10-1/2 HP gas engine or 2 independent hydraulic motors
-
14½"
wide conveyor chain with 1/4" crossbars
-
Spinner
chute has two adjustable internal baffles
-
4
Hinged top screens, ¼" bars
-
Inverted V
-
Bolt-on
spinner housing
-
18"
Spinner disc
Model |
1400475SS |
1400475SSH |
1400500SS |
1400500SSH |
1400550SS |
1400550SSH |
Capacity |
3.5 cu. yds. |
3.5 cu. yds. |
4.0 cu. yds. |
4.0 cu. yds. |
4.5 cu. yds. |
4.5 cu. yds. |
Chute |
Standard |
Standard |
Standard |
Standard |
Standard |
Standard |
Construction |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Controller |
In-Cab Control Console |
N/A |
In-Cab Control Console |
N/A |
In-Cab Control Console |
N/A |
Cover |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
Feed Mechanism |
14.5"W Conveyor Chain |
14.5"W Conveyor Chain |
14.5"W Conveyor Chain |
14.5"W Conveyor Chain |
14.5"W Conveyor Chain |
14.5"W Conveyor Chain |
Hopper Dimensions |
- |
- |
- |
- |
- |
- |
Hopper Length |
96" |
96" |
108" |
108" |
119" |
119" |
Hopper Width |
115.9" |
120.5" |
127.9" |
130.8" |
138.9" |
141.8" |
Ideal Use |
Municipal & Commercial |
Municipal & Commercial |
Municipal & Commercial |
Municipal & Commercial |
Municipal & Commercial |
Municipal & Commercial |
Overall Height |
44.4" |
44.4" |
44.6" |
45.5" |
45.5" |
70" |
Overall Width |
70" |
70" |
70" |
70" |
70" |
70" |
Power Source |
10.5 HP Briggs & Straton Intek Gas Engine |
2 Independent Hydraulic Motors |
10.5 HP Briggs & Straton Intek Gas Engine |
2 Independent Hydraulic Motors |
10.5 HP Briggs & Straton Intek Gas Engine |
2 Independent Hydraulic Motors |
Spinner |
18" |
18" |
18" |
18" |
18" |
18" |
Spreading Material |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Spreading Width |
4-30 ft. |
4-30 ft. |
4-30 ft. |
4-30 ft. |
4-30 ft. |
4-30 ft. |
Top Screen |
(4) ¼" Black Powder Coated Steel |
(4)¼" Black Powder Coated Steel |
(4) ¼" Black Powder Coated Steel |
(4) ¼" Black Powder Coated Steel |
(4) ¼" Black Powder Coated Steel |
(4) ¼" Black Powder Coated Steel |
Vehicle Application |
GVW Chassis of 15,000 - 26,000 lbs. |
GVW Chassis of 15,000 - 26,000 lbs. |
GVW Chassis of 15,000 - 26,000 lbs. |
GVW Chassis of 15,000 - 26,000 lbs. |
GVW Chassis of 17,500 - 26,000 lbs. |
GVW Chassis of 17,500 - 26,000 lbs. |
Vibrator |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
7 – 10 Cubic Yard Auger Drive
Spread Material: bulk salt, salt
& sand mix
Feed Mechanism: 7" diameter, variable-pitch
hard faced auger
Power Source: hydraulic
-
Capacity: 7.0 cu.
yds. (10'), 8.0 cu. yds. (11'), 9.0 cu. yds. (12'), 10.0 cu. yds. (14')
-
304 Stainless Steel
Hopper
-
Material spread up
to 45'
-
Two independent,
direct-drive hydraulic motors
-
7" diameter auger
with multi-pitch design
-
Adjustable height
spinner chute
-
⅜" heavy-duty hinged
top screens with 4" peak
-
18" poly spinner
disc
Model |
1471056SSH |
1471156SSH |
1471256SSH |
1471456SSH |
Capacity |
7 cu. yds. |
8 cu. yds. |
9 cu. yds |
10 cu. Yds |
Chute |
Adjustable |
Adjustable |
Adjustable |
Adjustable |
Construction |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Controller |
N/A |
N/A |
N/A |
N/A |
Cover |
N/A |
N/A |
N/A |
N/A |
Feed Mechanism |
7" Hard Surface, Multi Pitch Auger |
7" Hard Surface, Multi Pitch Auger |
7" Hard Surface, Multi Pitch Auger |
7" Hard Surface, Multi Pitch Auger |
Hopper Dimensions |
56" x 84" x 120" |
56" x 84" x 132" |
56" x 84" x 144" |
56" x 84" x 168" |
Hopper Length |
120" |
132" |
144" |
168" |
Hopper Width |
84" |
84" |
84" |
84" |
Ideal Use |
Municipal & Commercial |
Municipal & Commercial |
Municipal & Commercial |
Municipal & Commercial |
Overall Height |
55.25" |
55.25" |
55.25" |
55.25" |
Overall Width |
87.7" |
87.7" |
87.7" |
87.7" |
Power Source |
2 Independent Direct Drive Hydraulic Motors |
2 Independent Direct Drive Hydraulic Motors |
2 Independent Direct Drive Hydraulic Motors |
2 Independent Direct Drive Hydraulic Motors |
Spinner |
18" |
18" |
18" |
18" |
Spreading Material |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Spreading Width |
4-45 ft. |
4-45 ft. |
4-45 ft. |
4-45 ft. |
Top Screen |
(6) 3/8" Black Powder Coated Steel |
(6) 3/8" Black Powder Coated Steel |
(6) 3/8" Black Powder Coated Steel |
(6) 3/8" Black Powder Coated Steel |
Vehicle Application |
Minimum GVW of 26,000 lbs. |
Minimum GVW of 33,000 lbs. |
Minimum GVW of 33,000 lbs. |
Minimum GVW of 33,000 lbs. |
Vibrator |
N/A |
N/A |
N/A |
N/A |
6 – 8 Cubic Yard
Spread Material: bulk salt, bulk
sand, salt & sand mix
Feed Mechanism: 24" wide conveyor with 3/8"
bars
Power Source: hydraulic
-
Capacity: 6 cu. yds.
(9'); 7, 8, 9 cu. yds. (10'), 10, 11, 13 cu. yds. (12'), 12, 13, 14 cu. yds.
(14')
-
304 stainless steel
hopper
-
Material spread up
to 40'
-
Adjustable feed gate
-
24" wide conveyor
with ⅜" bars
-
Two independent
direct drive hydraulic motors
-
Choice of three gear
box ratios: 50:1, 25:1 or 6:1
-
Hinged top screens,
⅜" bars on 3" centers
-
Inverted V,
adjustable
-
2" drive shaft and
bearings with 8-tooth sprockets
-
1½" spring loaded
idler shaft and bearings with 8-tooth sprockets
-
Quick release hinged
chute (no tools needed)
-
20" Poly spinner
disc
Model |
1450657SSH |
1425657SSH |
1406657SSH |
1450757SSH |
1425757SSH |
1406757SSH |
1450863SSH |
1425863SSH |
1406863SSH |
Capacity |
6 cu. yd. |
6 cu. yd. |
6 cu. yd. |
7 cu. yd. |
7 cu. yd. |
7 cu. yd. |
8 cu. yd. |
8 cu. yd. |
8 cu. yd. |
Chute |
Adjustable |
Adjustable |
Adjustable |
Adjustable |
Adjustable |
Adjustable |
Adjustable |
Adjustable |
Adjustable |
Construction |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Controller |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
Cover |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
Feed Mechanism |
24"W Conveyor, 50:1 Gearbox ratio |
24"W Conveyor, 25:1 Gearbox ratio |
24"W Conveyor, 6:1 Gearbox ratio |
24"W Conveyor, 50:1 Gearbox ratio |
24"W Conveyor, 25:1 Gearbox ratio |
24"W Conveyor, 6:1 Gearbox ratio |
24"W Conveyor, 50:1 Gearbox ratio |
24"W Conveyor, 25:1 Gearbox ratio |
24"W Conveyor, 6:1 Gearbox ratio |
Hopper Dimensions |
57" x 82" x 108" |
57" x 82" x 108" |
57" x 82" x 108" |
57" x 82" x 120" |
57" x 82" x 120" |
57" x 82" x 120" |
63" x 82" x 120" |
63" x 82" x 120" |
63" x 82" x 120" |
Hopper Length |
108" |
108" |
108" |
120" |
120" |
120" |
120" |
120" |
120" |
Hopper Width |
82" |
82" |
82" |
82" |
82" |
82" |
82" |
82" |
82" |
Ideal Use |
Municipal & Commercial |
Municipal & Commercial |
Municipal & Commercial |
Municipal & Commercial |
Municipal & Commercial |
Municipal & Commercial |
Municipal & Commercial |
Municipal & Commercial |
Municipal & Commercial |
Overall Height |
57" |
57" |
57" |
57" |
57" |
57" |
63" |
63" |
63" |
Overall Width |
82" |
82" |
82" |
82" |
82" |
82" |
82" |
82" |
82" |
Power Source |
2 Independent Direct Drive Hydraulic Motors |
2 Independent Direct Drive Hydraulic Motors |
2 Independent Direct Drive Hydraulic Motors |
2 Independent Direct Drive Hydraulic Motors |
2 Independent Direct Drive Hydraulic Motors |
2 Independent Direct Drive Hydraulic Motors |
2 Independent Direct Drive Hydraulic Motors |
2 Independent Direct Drive Hydraulic Motors |
2 Independent Direct Drive Hydraulic Motors |
Spinner |
20" |
20" |
20" |
20" |
20" |
20" |
20" |
20" |
20" |
Spreading Material |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Spreading Width |
4-45 ft. |
4-45 ft. |
4-45 ft. |
4-45 ft. |
4-45 ft. |
4-45 ft. |
4-45 ft. |
4-45 ft. |
4-45 ft. |
Top Screen |
(4) ⅜" Black Powder Coated Steel |
(4) ⅜" Black Powder Coated Steel |
(4) ⅜" Black Powder Coated Steel |
(4) ⅜" Black Powder Coated Steel |
(4) ⅜" Black Powder Coated Steel |
(4) ⅜" Black Powder Coated Steel |
(4) ⅜" Black Powder Coated Steel |
(4) ⅜" Black Powder Coated Steel |
(4) ⅜" Black Powder Coated Steel |
Vehicle Application |
Minimum GVW of 26,000 lbs. |
Minimum GVW of 26,000 lbs. |
Minimum GVW of 26,000 lbs. |
Minimum GVW of 33,000 lbs. |
Minimum GVW of 33,000 lbs |
Minimum GVW of 33,000 lbs. |
Minimum GVW of 33,000 lbs. |
Minimum GVW of 33,000 lbs. |
Minimum GVW of 33,000 lbs. |
Vibrator |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
9 – 11 Cubic Yard
Spread Material: bulk salt, bulk
sand, salt & sand mix
Feed Mechanism: 24" wide conveyor with 3/8"
bars
Power Source: hydraulic
-
Capacity: 6 cu. yds.
(9'); 7, 8, 9 cu. yds. (10'), 10, 11, 13 cu. yds. (12'), 12, 13, 14 cu. yds.
(14')
-
304 stainless steel
hopper
-
Material spread up
to 40'
-
Adjustable feed gate
-
24" wide conveyor
with ⅜" bars
-
Two independent
direct drive hydraulic motors
-
Choice of three gear
box ratios: 50:1, 25:1 or 6:1
-
Hinged top screens,
⅜" bars on 3" centers
-
Inverted V,
adjustable
-
2" drive shaft and
bearings with 8-tooth sprockets
-
1½"
spring loaded idler shaft and bearings with 8-tooth sprockets
-
Quick release hinged
chute (no tools needed)
-
20" Poly spinner
disc
Model |
1450969SSH |
1425969SSH |
1406969SSH |
1451057SSH |
1461057SSH |
1451163SSH |
1421163SSH |
1461163SSH |
Capacity |
9 cu. yd. |
9 cu. yd. |
9 cu. yd. |
10 cu. yds. |
10 cu. yds. |
11 cu. yds. |
11 cu. yds. |
11 cu. yds. |
Chute |
Adjustable |
Adjustable |
Adjustable |
Adjustable |
Adjustable |
Adjustable |
Adjustable |
Adjustable |
Construction |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Controller |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
Cover |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
Feed Mechanism |
24"W Conveyor, 50:1 Gearbox ratio |
24"W Conveyor, 25:1 Gearbox ratio |
24"W Conveyor, 6:1 Gearbox ratio |
24"W Conveyor, 50:1 Gearbox ratio |
24"W Conveyor, 6:1 Gearbox ratio |
24"W Conveyor, 50:1 Gearbox ratio |
24"W Conveyor, 25:1 Gearbox ratio |
24"W Conveyor, 6:1 Gearbox ratio |
Hopper Dimensions |
69" x 82" x 120" |
69" x 82" x 120" |
69" x 82" x 120" |
57" x 82" x 167" |
57" x 82" x 167" |
63" x 82" x 167" |
63" x 82" x 167" |
63" x 82" x 167" |
Hopper Length |
120" |
120" |
120" |
144" |
144" |
144" |
144" |
144" |
Hopper Width |
82" |
82" |
82" |
82" |
82" |
82" |
82" |
82" |
Ideal Use |
Municipal & Commercial |
Municipal & Commercial |
Municipal & Commercial |
Municipal & Commercial |
Municipal & Commercial |
Municipal & Commercial |
Municipal & Commercial |
Municipal & Commercial |
Overall Height |
69" |
69" |
69" |
57" |
57" |
63" |
63" |
63" |
Overall Width |
82" |
82" |
82" |
82" |
82" |
82" |
82" |
82" |
Power Source |
2 Independent Direct Drive Hydraulic Motors |
2 Independent Direct Drive Hydraulic Motors |
2 Independent Direct Drive Hydraulic Motors |
2 Independent Direct Drive Hydraulic Motors |
2 Independent Direct Drive Hydraulic Motors |
2 Independent Direct Drive Hydraulic Motors |
2 Independent Direct Drive Hydraulic Motors |
2 Independent Direct Drive Hydraulic Motors |
Spinner |
20" |
20" |
20" |
20" |
20" |
20" |
20" |
20" |
Spreading Material |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Spreading Width |
4-45 ft. |
4-45 ft. |
4-45 ft. |
4-40 ft. |
4-40 ft. |
4-40 ft. |
4-40 ft. |
4-40 ft. |
Top Screen |
(4) 3/8" Black Powder Coated Steel |
(4) 3/8" Black Powder Coated Steel |
(4) 3/8" Black Powder Coated Steel |
(6) 3/8" Black Powder Coated Steel |
(6) 3/8" Black Powder Coated Steel |
(6) 3/8" Black Powder Coated Steel |
(6) 3/8" Black Powder Coated Steel |
(6) 3/8" Black Powder Coated Steel |
Vehicle Application |
Minimum GVW of 35,000 lbs. |
Minimum GVW of 35,000 lbs. |
Minimum GVW of 35,000 lbs. |
Minimum GVW of 35,000 lbs. |
Minimum GVW of 35,000 lbs |
Minimum GVW of 38,000 lbs. |
Minimum GVW of 38,000 lbs. |
Minimum GVW of 38,000 lbs. |
Vibrator |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
12-13 Cubic Yard
Spread Material: bulk salt, bulk
sand, salt & sand mix
Feed Mechanism: 24" wide conveyor with 3/8"
bars
Power Source: hydraulic
-
Capacity: 6 cu. yds. (9'); 7, 8, 9
cu. yds. (10'), 10, 11, 13 cu. yds. (12'), 12, 13, 14 cu. yds. (14')
-
304 stainless steel hopper
-
Material spread up to 40'
-
Adjustable feed gate
-
24" wide conveyor with ⅜" bars
-
Two independent direct drive
hydraulic motors
-
Choice of three gear box ratios:
50:1, 25:1 or 6:1
-
Hinged top screens, ⅜" bars on 3"
centers
-
Inverted V, adjustable
-
2" drive shaft and bearings with
8-tooth sprockets
-
1½"
spring loaded idler shaft and bearings with 8-tooth sprockets
-
Quick release hinged chute (no
tools needed)
-
20" Poly spinner disc
Model |
1451257SSH |
1421257SSH |
1461257SSH |
1451369SSH |
1421369SSH |
1461369SSH |
1451363SSH |
1421363SSH |
Capacity |
12 cu. yds. |
12 cu. yds. |
12 cu. yds. |
13 cu. yds. |
13 cu. yds. |
13 cu. yds. |
13 cu. yds. |
13 cu. yds. |
Chute |
Adjustable |
Adjustable |
Adjustable |
Adjustable |
Adjustable |
Adjustable |
Adjustable |
Adjustable |
Construction |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Controller |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
Cover |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
Feed Mechanism |
24"W Conveyor, 50:1 Gearbox ratio |
24"W Conveyor, 25:1 Gearbox ratio |
24"W Conveyor, 6:1 Gearbox ratio |
24"W Conveyor, 50:1 Gearbox ratio |
24"W Conveyor, 25:1 Gearbox ratio |
24"W Conveyor, 6:1 Gearbox ratio |
24"W Conveyor, 50:1 Gearbox ratio |
24"W Conveyor, 25:1 Gearbox ratio |
Hopper Dimensions |
57" x 82" x 191" |
57" x 82" x 191" |
57" x 82" x 191" |
69" x 82" x 167" |
69" x 82" x 167" |
69" x 82" x 167" |
63" x 82" x 191" |
63" x 82" x 191" |
Hopper Length |
168" |
168" |
168" |
144" |
144" |
144" |
168" |
168" |
Hopper Width |
82" |
82" |
82" |
82" |
82" |
82" |
82" |
82" |
Ideal Use |
Municipal & Commercial |
Municipal & Commercial |
Municipal & Commercial |
Municipal & Commercial |
Municipal & Commercial |
Municipal & Commercial |
Municipal & Commercial |
Municipal & Commercial |
Overall Height |
57" |
57" |
57" |
69" |
69" |
69" |
63" |
63" |
Overall Width |
82" |
82" |
82" |
82" |
82" |
82" |
82" |
82" |
Power Source |
2 Independent Direct Drive Hydraulic Motors |
2 Independent Direct Drive Hydraulic Motors |
2 Independent Direct Drive Hydraulic Motors |
2 Independent Direct Drive Hydraulic Motors |
2 Independent Direct Drive Hydraulic Motors |
2 Independent Direct Drive Hydraulic Motors |
2 Independent Direct Drive Hydraulic Motors |
2 Independent Direct Drive Hydraulic Motors |
Spinner |
20" |
20" |
20" |
20" |
20" |
20" |
20" |
20" |
Spreading Material |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Spreading Width |
4-40 ft. |
4-40 ft. |
4-40 ft. |
4-40 ft. |
4-40 ft. |
4-40 ft. |
4-40 ft. |
4-40 ft. |
Top Screen |
(6) ⅜" Black Powder Coated Steel |
(6) ⅜" Black Powder Coated Steel |
(6) ⅜" Black Powder Coated Steel |
(6) ⅜" Black Powder Coated Steel |
(6) ⅜" Black Powder Coated Steel |
(6) ⅜" Black Powder Coated Steel |
(6) ⅜" Black Powder Coated Steel |
(6) ⅜" Black Powder Coated Steel |
Vehicle Application |
Minimum GVW of 44,000 lbs |
Minimum GVW of 44,000 lbs. |
Minimum GVW of 44,000 lbs |
Minimum GVW of 38,000 lbs. |
Minimum GVW of 38,000 lbs. |
Minimum GVW of 38,000 lbs. |
Minimum GVW of 44,000 lbs. |
Minimum GVW of 44,000 lbs. |
Vibrator |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
14 Cubic Yard
Spread Material: bulk salt, bulk
sand, salt & sand mix
Feed Mechanism: 24" wide conveyor with 3/8"
bars
Power Source: hydraulic
-
Capacity: 6 cu. yds.
(9'); 7, 8, 9 cu. yds. (10'), 10, 11, 13 cu. yds. (12'), 12, 13, 14 cu. yds.
(14')
-
304 stainless steel
hopper
-
Material spread up
to 40'
-
Adjustable feed gate
-
24" wide conveyor
with ⅜" bars
-
Two independent
direct drive hydraulic motors
-
Choice of three gear
box ratios: 50:1, 25:1 or 6:1
-
Hinged top screens,
⅜" bars on 3" centers
-
Inverted V,
adjustable
-
2" drive shaft and
bearings with 8-tooth sprockets
-
1½"
spring loaded idler shaft and bearings with 8-tooth sprockets
-
Quick release hinged
chute (no tools needed)
-
20" Poly spinner
disc
Model |
1451469SSH |
1421469SSH |
1461469SSH |
Capacity |
14 cu. yds |
14 cu. yds |
14 cu. yds |
Chute |
Adjustable |
Adjustable |
Adjustable |
Construction |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Controller |
N/A |
N/A |
N/A |
Cover |
N/A |
N/A |
N/A |
Feed Mechanism |
24"W Conveyor, 50:1 Gearbox ratio |
24"W Conveyor, 25:1 Gearbox ratio |
24"W Conveyor, 6:1 Gearbox ratio |
Hopper Dimensions |
69" x 82" x 191" |
69" x 82" x 191" |
69" x 82" x 191" |
Hopper Length |
168" |
168" |
168" |
Hopper Width |
82" |
82" |
82" |
Ideal Use |
Municipal & Commercial |
Municipal & Commercial |
Municipal & Commercial |
Model |
1451469SSH |
1421469SSH |
1461469SSH |
Overall Height |
69" |
69" |
69" |
Overall Width |
82" |
82" |
82" |
Power Source |
2 Independent Direct Drive Hydraulic Motors |
2 Independent Direct Drive Hydraulic Motors |
2 Independent Direct Drive Hydraulic Motors |
Spinner |
20" |
20" |
20" |
Spreading Material |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Spreading Width |
4-40 ft. |
4-40 ft. |
4-40 ft. |
Top Screen |
(6) 3/8" Black Powder Coated Steel |
(6) 3/8" Black Powder Coated Steel |
(6) 3/8" Black Powder Coated Steel |
Vehicle Application |
Minimum GVW of 48,000 lbs. |
Minimum GVW of 48,000 lbs. |
Minimum GVW of 48,000 lbs. |
Vibrator |
N/A |
N/A |
N/A |
Liquid
Spray Systems
-
12 VDC, 3
GPM/45 PSI electric diaphragm pump
-
Hydraulic
Drive: 4.5 GPM @ 1,750 RPM (150 PSI) with Proportioning Valve, Bronze pump,
bronze gears, stainless steel shaft
-
30-gallon
polymer reservoir (48"L x 13"W x 14"T)
-
55-gallon
polymer reservoir (34"L x 23"W x 26"T)
-
105-gallon polymer reservoir (69"L x 20"W x 25"T)
-
200-gallon polymer reservoir (151"L x 28"W x 33"T)
-
Low
Pressure – empty tank light/buzzer indicator
-
In-cab
variable speed pump control (electric models)
-
Adjustable Hydraulic proportioning valve (hydraulic models)
-
Systems
include tank, pump, cab controller, hoses, fittings, ball valve, filter, wiring,
connectors, stainless steel brackets and tie-downs
-
Enclosed
pump system for corrosion resistance
-
304
stainless steel mounts
BENEFITS
-
Provides more efficient salt distribution with fewer
applications required
-
Speeds the melting process & works at lower temperatures than
salt
-
Residual material on the pavement lasts longer
-
Easy to use and maintain
In Bed
Liquid Spray Systems
-
2" hitch
mounted liquid spray system
-
335
gallon poly reservoir/bladder for 6' (#6196335) or 8' (#6198335) pick-up
bed/flat bed with built-in tie points
-
7 gallons
per minute diaphragm pump dispenses up to 50 gallons per lane mile.
-
12 VDC,
28 amps max, rear quick connect harness
-
In-cab
on/off control, standard. Pressure switch activates pump on demand
-
Quick
Detach PVC spray bar
-
Stainless
steel pump cover w/ LED license plate light
-
Light
weight, reinforced polymer reservoir rolls-up for bulkhead storage.
-
Optional:
⅜"x50' hose reel with adjustable hand-held spray nozzle
for side walks, bus shelters and hard to reach areas.
-
Quick and
simple, one-person installation with hitch pin.
-
Lightweight and better visibility than fixed tank
Under
Tailgate-Electric
96"
wide Dump Bodies (for trucks without central hydraulics)
Spread Material: bulk salt, salt & sand mix
Feed Mechanism: 6" Auger with ⅜" flighting
Power Source: electric
-
304
stainless steel
-
Material
spread up to 25'
-
Two 12
VDC direct drive motors (¾ HP for auger, ½ HP for spinner)
-
Standard
discharge or center discharge
-
14" poly
spinner and stainless steel dump body mounting plates
-
10-gauge
trough has 3-point hinged bottom cover for easy access to entire auger assembly
and one-person cleanout.
-
6" auger
with ⅜" flighting, includes auger screen
-
Sealed,
self-aligning 1¼" diameter bearings with grease fittings
-
Optional
stainless steel spill shields
Construction |
304 stainless |
Stainless Steel |
Controller |
120 A High Power | Variable Auger Speed | Variable Spinner Speed |
Vibrator Switch | Utility Light Output |
Variable Speed |
Feed Mechanism |
6" Auger w/ ⅜" flighting |
6" Auger w/ ⅜" flighting |
Hopper Dimensions |
99" x 27.5" x 17" |
99" x 27.5" x 17" |
Ideal Use |
Heavy-Duty Municipal\r\n& Commercial |
Heavy-Duty Municipal\r\n& Commercial |
Model |
92440SSA |
92441SSA |
Overall Height |
31.25"/ 34.25" |
31.25"/ 34.25" |
Overall Width |
96" |
96" |
Power Source |
(2) 12V DC direct drive |
(2) 12V DC direct drive |
Spinner |
14" Poly |
14" |
Spreading Material |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Spreading Width |
5'-30' |
4-25 ft. |
Vehicle Application |
96" wide Dump Bodies |
96" wide Dump Bodies |
Under
Tailgate-Hydraulic
96"
wide Dump Bodies
Spread Material: bulk salt, salt & sand mix
Feed Mechanism: 6" Auger with ⅜" flighting
Power Source: hydraulic
-
Stainless
steel or orange powder-coated carbon steel
-
Material
spread up to 40'
-
Hydraulic
power drives auger and spinner
-
Standard
discharge or left discharge
-
10-gauge
trough has 3-point hinged bottom cover for easy access to entire auger assembly
and one-person cleanout.
-
6" auger
with ⅜" flighting, includes auger screen
-
18" poly
spinner
-
Sealed,
self-aligning 1¼" diameter bearing with grease fitting
-
Low-speed, high-torque orbital motors.
-
Hydraulic
safety lockout system.
-
Optional
powder coated spill shields (924F0106PR)
-
Optional
stainless steel spill shields
Model |
92420A |
92420SSA |
92421SSA |
92425SSA |
92426SSA |
92430A |
92430SSA |
Construction |
Carbon Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Carbon Steel |
Stainless Steel |
Feed Mechanism |
6" Auger w/3/8" flighting |
6" Auger w/3/8" flighting |
6" Auger w/3/8" flighting |
6" Auger w/3/8" flighting |
6" Auger w/3/8" flighting |
6" Auger, 3/8" flighting, 5:1 Gearbox ratio |
6" Auger, 3/8" flighting, 5:1 Gearbox ratio |
Hopper Dimensions |
98" x 19" x 17" |
98" x 19" x 17" |
98" x 19" x 17" |
98" x 19" x 17" |
98" x 19" x 24" |
98" x 19" x 17" |
98" x 19" x 17" |
Ideal Use |
Heavy-Duty Municipal\r\n& Commercial |
Heavy-Duty Municipal\r\n& Commercial |
Heavy-Duty Municipal\r\n& Commercial |
Heavy-Duty Municipal\r\n& Commercial |
Heavy-Duty Municipal\r\n& Commercial |
Heavy-Duty Municipal\r\n& Commercial |
Heavy-Duty Municipal\r\n& Commercial |
Model |
92420A |
92420SSA |
92421SSA |
92425SSA |
92426SSA |
92430A |
92430SSA |
Overall Height |
31.25"/ 34.25" |
31.25"/ 34.25" |
38.00"/ 41.00" |
31.25"/ 34.25" |
38.00"/ 41.00" |
31.25"/ 34.25" |
31.25"/ 34.25" |
Overall Width |
96" |
96" |
96" |
96" |
96" |
96" |
96" |
Power Source |
2 Independent Direct Drive Hydraulic Motors |
2 Independent Direct Drive Hydraulic Motors |
2 Independent Direct Drive Hydraulic Motors |
2 Independent Direct Drive Hydraulic Motors |
2 Independent Direct Drive Hydraulic Motors |
2 Independent Hydraulic Motors |
2 Independent Hydraulic Motors |
Spinner |
18" |
18" |
18" |
18" |
18" |
18" |
18" |
Spreading Material |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Spreading Width |
4-40 ft. |
4-25 ft. |
4-40 ft. |
4-40 ft. |
4-40 ft. |
4-40 ft. |
4-40 ft. |
Vehicle Application |
96" wide Dump Bodies |
96" wide Dump Bodies |
96" wide Dump Bodies |
96" wide Dump Bodies |
96" wide Dump Bodies |
96" wide Dump Bodies |
96" wide Dump Bodies |
Replacement Tailgate for Dump Bodies & Inserts
Spread
Material: bulk salt, salt & sand mix
Feed Mechanism: dual flight auger and breaker bar
with mixing tines
Power Source: electric
-
304
stainless steel body
-
Material
spread up to 25'
-
Two 12
VDC direct drive motor (¾HP
for auger, ½ HP for spinner)
-
Auger (5"
O.D. x 2.4" I.D. x 20"L) with mixing tines
-
Hinged
14" poly spinner
Model |
9035000 |
9035100 |
9035101 |
|
9035102 |
5535000 |
Controller |
Variable Speed |
Variable Speed |
Variable Speed |
Variable Speed |
Variable Speed |
Feed Mechanism |
Dual Flight Augers With Mixing Tines |
6" Auger w/3/8" flighting, electric with center discharge |
6" Auger w/3/8" flighting, electric with driver side discharge |
6" Auger w/3/8" flighting, electric with center discharge |
Dual Flight Augers With Mixing Tines |
Overall Height |
36" |
36" |
36" |
36" |
36" |
Overall Width |
73" - 95" |
84.25 - 90.25" |
84.25 - 90.25" |
84.25 - 90.25" |
73" - 95" |
Power Source |
(2) 12V DC direct drive |
(2) 12V DC direct drive |
(2) 12V DC direct drive |
(2) 12V DC direct drive |
(2) 12V DC direct drive |
Spinner |
14" |
14" |
14" |
14" |
14" |
Spreading Material |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Bulk Salt; 50/50 Salt/Sand mix |
Spreading Width |
4-25 ft. |
4-25 ft. |
4-25 ft. |
4-25 ft. |
4-25 ft. |
Vehicle Application |
1-Ton/Super Duty Dump Bodies |
1-Ton/Super Duty Dump Bodies |
1-Ton/Super Duty Dump Bodies |
1-Ton/Super Duty Dump Bodies |
All DumperDogg? Inserts |
Walk
Behind
- Large 1.5 - 2.5 cu. ft. poly hopper
- Carbon steel or stainless steel framework.
Model |
WB101G |
WB201G |
WB400 |
Capacity |
1.5 cu.ft/ 100 lb. |
1.5 cu.ft/ 100 lb. |
2.5 cu.ft/ 200 lb. |
Construction |
Steel |
Stainless Steel |
Steel/Stainless Steel |
Controller |
Manual Lever |
Manual Lever |
Manual Lever |
Cover |
Clear Poly |
Clear Poly |
Clear Poly |
Feed Mechanism |
Gravity Feed |
Gravity Feed |
Gravity Feed |
Hopper Dimensions |
31.5" x 26.5"x 22.5" |
31.5" x 26.5"x 40" |
35" x 44"x 45" |
Hopper Length |
19" |
19" |
43.1" |
Hopper Width |
26.5" |
22.5" |
18.3" |
Ideal Use |
Commercial/Residential |
Commercial/Residential |
Commercial/Residential |
Model |
WB101G |
WB201G |
WB400 |
Overall Height |
31.5" |
31.5" |
35" |
Overall Width |
26.5" |
26.5" |
44" |
Power Source |
N/A |
N/A |
N/A |
Spinner |
9" |
9" |
Drop Spread |
Spreading Material |
bagged salt |
bagged salt |
bagged salt |
Spreading Width |
3-24 ft. |
3-24 ft. |
44 in |
Top Screen |
black powder coated steel |
black powder coated steel |
black powder coated steel |
Contact
us for more information.
Mapquest can give the directions to you
click
here to go to Mapquest site.
|