|
Steel Dump Inserts
The EZ-Dumper
Dump Insert is the perfect solution for
landscapers, general contractors and handy homeowners. It bolts directly to most
full-size pickup trucks in about two hours with few or no alterations. It dumps
and lowers using a 12V Monarch Hydraulic Double-Acting Pump that is connected
directly to your truck’s battery. It is also available in a 6’ model that fits
most short bed trucks and has a payload capacity of 1.5 cubic yards!
Easy to Install and Operate
All you need are a few common tools. No alterations are needed for most
trucks. Simply slide the EZ-Dumper into your truck bed, secure it with bolts in
the holes already on your truck, and you’re ready to go. To empty a payload,
just open the tailgate and push the button on your remote. The EZ-Dumper lifts
to an angle of 51 degrees in about 15 seconds for a quick and clean unloading.
Features
- The Original Hydraulic Dump Insert for Trucks (Since 1972)
- 6,000lb Lift Capacity
- 12 Gauge Floor
- 14 Gauge Sides
- Expansion Stake Pockets (outside)
- Flat Bar Rub Rails
- Powder Coat Black (Colors Optional)
- 2 Cubic Yards of Capacity (8′ Insert, Upgradable to 4 Cubic
Yards with Mounted Sideboads and Cab Protector)
- Turn Your Pickup into a Dump Truck in About 2 Hours without
the Overhead Expense
- Removable, Double-acting Tailgate Lets You Dump, Then
Spread What You Dump
- Backed by the Best Warranty in the Industry: Two Years of
Front-to-Tailgate, Parts and Labor
- Fits Most Full Size Trucks, Short Bed Truck Insert Also
Available (EZ0012TSB)
- Perfect for Landscapers, General Contractors and Handy
Homeowners
Specifications for the 8'
| Insert Type |
EZ0012T 8′ Dump Insert |
| Bed Length |
96″ |
| Unloaded Weight |
787 lb |
| Payload Capacity |
6000 lb |
| Volume Capacity |
2 Cubic Yards |
| Dump Angle |
51 Degrees |
| Frame Construction |
Structural Steel Angle |
| Side Steel |
14 Gauge |
| Deck Steel |
12 Gauge |
| Tailgate |
Double-Acting Removable Spreader |
| Energy Source |
Truck Battery |
| Power Unit |
Double Acting Monarch Pump |
| Cylinder(s) |
Mounted Under Unit |
| Hydraulics |
Power Up/Power Down |
| Remote Control |
Standard |
| Tie-down Features |
Full Length Flat Bar Rub Rails |
| Expansion Features |
8 Stake Pockets (outside) |
| Lubrication |
Thread in Grease Fittings on Pivots |
| Installation |
Four Bolt-Down Clamps |
| Standard Color |
Powder Coat Black (other colors optional) |
| Warranty |
2 Years Front to Tailgate |
Specifications for the 6'
| Insert Type |
EZ0012TSB 6′ Dump Insert |
| Bed Length |
74-1/8″ |
| Unloaded Weight |
691 lb |
| Payload Capacity |
6000 lb |
| Volume Capacity |
1.5 Cubic Yards |
| Dump Angle |
51 Degrees |
| Frame Construction |
Structural Steel Angle |
| Side Steel |
14 Gauge |
| Deck Steel |
12 Gauge |
| Tailgate |
Double-Acting Removable Spreader |
| Energy Source |
Truck Battery |
| Power Unit |
Double Acting Monarch Pump |
| Cylinder(s) |
Mounted Under Unit |
| Hydraulics |
Power Up/Power Down |
| Remote Control |
Standard |
| Tie-down Features |
Full Length Flat Bar Rub Rails |
| Expansion Features |
6 Stake Pockets (outside) |
| Lubrication |
Thread in Grease Fittings on Pivots |
| Installation |
Four Bolt-Down Clamps |
| Standard Color |
Powder Coat Black (other colors optional) |
| Warranty |
2 Years Front to Tailgate |
Available
Options
-
Steel Cab Protector
- Tarp Kit
- 20″ High Steel Side and Tailgate Extensions
- 12″ High Steel Side Extension Bracket Kit
(holds 2×12 board)
- 19″ High Steel Side Extension Bracket Kit
(holds 2×12 board)
- Coal Chute Spreader Tailgate
- Hammertone Powder Coat Finish
- Custom Color Powder Coat Finish
Contact
us for more information.
Mapquest can give the directions to you
click
here to go to Mapquest site.
|
