|
Service Body Dump Inserts
The EZ-Dumper Service Body Dump Insert is a
custom built unit made specifically to fit your Service Truck Body. With the EZ-Dumper
Service Body Insert you can unload your pickup truck bed in about 15 seconds
with the push of a button. You’ll never have to unload your truck by hand again!
The EZ-Dumper can hold and unload up to 6,000 lbs. or two
cubic yards of firewood, topsoil, gravel, mulch, grain, or whatever, depending
on the weight-carrying capacity of your truck. Easy to Install and Operate.
Do-it-yourself installation of EZ-Dumper is a breeze. No alterations are needed
for most trucks. Just slide the dumper into your truck bed, secure it with bolts
and holes already on your truck, and you are ready to go. We even include the
hydraulic fluid.
Features
- The Original Hydraulic Dump Insert for Trucks (Since 1972)
- Available in Steel, Stainless Steel and Aluminum
- Custom Made to Fit Your Service Body
- 6,000lb Lift Capacity
- 14 Gauge Steel or 1/8″ Aluminum Deck
- 12 Gauge Steel or 3/16″ Aluminum Deck
- Expansion Stake Pockets Available
- Flat Bar Rub Rail Available
- Powder Coat Black (Colors Optional)
- Turn Your Service Truck into a Dump Truck in About 2 Hours
- Removable, Double-acting Tailgate Lets You Dump, Then
Spread What You Dump
- Backed by the Best Warranty in the Industry: Two Years of
Front-to-Tailgate, Parts and Labor
Specifications
| Insert Type |
EZU0012T Custom Dump Insert – Available in
Steel, Stainless Steel & Aluminum |
| Payload Capacity |
6000 lb |
| Sides |
14 Gauge Steel or 1/8″ Aluminum |
| Deck |
12 Gauge or 3/16″ Aluminum |
| Tailgate |
Double-Acting Removable Spreader |
| Energy Source |
Truck Battery |
| Power Unit |
Double Acting Monarch Pump |
| Cylinder(s) |
Mounted Under Unit |
| Hydraulics |
Power Up/Power Down |
| Remote Control |
Standard |
| Tie-down Features |
Full Length Flat Bar Rub Rails |
| Expansion Features |
8 Stake Pockets (outside) |
| Lubrication |
Thread in Grease Fittings on Pivots |
| Installation |
Four Bolt-Down Clamps |
| Standard Color |
Powder Coat Black (Natural if Aluminum or
Stainless Steel) |
| Warranty |
2 Years Front to Tailgate |
Available Options
- Cab Protector
- Tarp Kit
- 20″ High Side and Tailgate Extensions
- 12″ High Steel Side Extension Bracket Kit
(holds 2×12 board)
- 19″ High Steel Side Extension Bracket Kit
(holds 2×12 board)
- Coal Chute Spreader Tailgate
- Hammertone Powder Coat Finish
- Custom Color Powder Coat Finish
Contact
us for more information.
Mapquest can give the directions to you
click
here to go to Mapquest site.
|
