Galion Stainless Steel Bodies
The Galion 103U body is designed for superior service on 9900
- 19500 GVWR cab/chassis'. The 103U is constructed with 10 gauge stainless
steel. Front corner posts, two intermediate side braces, full depth rear corner
posts and boxed “material-shedding" top rails are also standard.
Specifications
- General Dimensions:
Available in inside lengths from 8' through 11'-6", 84" inside width with 13"
sides and 19" gate or 18" sides and 24" gate.
- Sides:
10 Gauge high tensile steel with material shedding boxed top rails, full depth
10" rear corner post, front side brace, two intermediate vertical side braces
and 6" front and rear board extension pockets.
- Floor:
10 gauge high tensile steel, with 2" radius floor to side radius.
- Front Bulkhead:
10 gauge high tensile steel construction with two bend top flange.
- Tailgate:
10 gauge high tensile steel with full perimeter box bracing, two intermediate
vertical box braces, double acting design with long chains and two sets of
banjo eyes.
- Tailgate Hardware:
Heavy duty all stainless cast quick release top hardware and cast overshot
lower hardware with manual release handle.
- Lights:
Meets all requirements of FMVSS108 with oval stop/tail/turn lights recessed in
rear post. All lighting is recessed, shock mounted, complete with factory
wiring harness.
- Understructure:
Stacked design utilizing 6" structural longitudinals gusseted to 3" structural
channel crossmembers on 12" centers, lubricated front and rear cross shaft and
full width rear bolster.
- Safety Features:
All Galion 103U bodies are shipped with a “body up" warning light and OSHA
required back up alarm.
The Galion 133U body is designed for superior service on 9900
- 19500 GVWR cab/chassis'. This body feature a 3/16" high tensile steel floor,
10 gauge high tensile tailgate, head sheets and sides. The 133U is constructed
with stainless steel Front corner posts, smooth sides, full depth rear corner
posts and boxed “material-shedding" top rails are also standard.
Specifications
- General Dimensions:
Available in inside lengths from 8' through 11'-6", 84" inside width with 13"
sides and 19" gate or 18" sides and 24" gate.
- Sides:
10 Gauge high tensile steel with material shedding boxed top rails, full depth
10" rear corner post and low drag smooth design.
- Floor:
3/16" high tensile steel 1 pc with 2" formed in place floor to side radius.
- Front Bulkhead:
10 gauge high tensile steel construction with two bend top flange.
- Tailgate:
10 gauge high tensile steel. 1 panel design with full perimeter box bracing,
double acting design with long chains and two sets of banjo eyes.
- Tailgate Hardware:
Heavy duty all stainless cast quick release top hardware and cast overshot
lower hardware with manual release handle.
- Lights:
Meets all requirements of FMVSS108 with oval stop/tail/turn lights recessed in
rear post. All lighting is recessed, shock mounted, complete with factory
wiring harness.
- Understructure:
Crossmemberless design using 3/16" X 100K steel formed into 5"trapeziod
longbeams. Lubricated front and rear cross shafts and full width rear bolster.
- Safety Features:
All complete Galion 133U bodies and hoist are shipped with a “body up" warning
light and OSHA required back up alarm.
The Galion 433U smooth side body is especially designed for
heavy-duty hauling requirements. It is well-suited for construction work,
aggregate hauling and bucket loading. All units are built of tough high tensile
stainless steel to virtually outlast and outperform all others. Recommended for
single axle underbody hoist applications.
Specifications
- General Dimensions:
Available in 9’ and 10’ lengths, 86” inside width, 26” sides, 32” or 36” ends.
- Sides:
10 gauge stainless steel with material shedding boxed top rails, sloping
bottom rails,15" wide full depth rear corner post, 1 intermediate, formed in
place horizontal "V" brace, 10" front and rear board extension pockets and
full length tarp rails. Grip strut walkrail on both sides.
- Floor:
3/16” AR 450 Hardox with 9” weld in radius.
- Front Bulkhead:
10 gauge stainless steel construction with two bend top flange and one formed
in place intermediate "V" brace.
- Tailgate:
10 gauge stainless steel, 3 panel design with full perimeter box bracing, two
intermediate vertical braces and one intermediate horizontal brace, double
acting design with long chains and two sets of banjo eyes and full width lower
tailgate pin.
- Tailgate Hardware:
Heavy duty cast stainless steel "tarp friendly" top hardware and stainless
lower hardware with stainless manual release handle.
- Lights:
Meets all requirements of FMVSS108 with oval stop/tail/turn lights recessed in
rear post. All lighting is recessed, shock mounted, complete with factory
wiring harness.
- Understructure:
Crossmemberless design using 3/16" X 100K formed 10" trapezoidal longbeams.
Lubricated front and rear cross shafts and full width rear bolster.
- Safety Features:
All Galion 433U Smooth Side bodies are shipped with a "body up" warning light
and OSHA required back up alarm.
The Galion 453U is a heavy duty stainless steel body that is
well suited for aggregate hauling and spreading, and is ideal for snow removal
applications. This heavy duty body features full depth rear corner posts and
bolster, 6-panel tailgate and continuous weld throughout.
Specifications
- General Dimensions:
Available in 10' inside length, 84" inside width, 30" side and 40" ends.
- Sides:
7 gauge stainless steel with material shedding boxed top, full depth 15" rear
corner post, three intermediate vertical side braces, 10" front and rear board
extension pockets and full length tarp rails.
- Floor:
3/16", AR450 Hardox with 2" floor to side radius.
- Front Bulkhead:
7 gauge stainless steel construction with two bend top flange and one formed
in place intermediate “V" brace.
- Tailgate:
7 gauge stainless steel, 6 panel design with full perimeter box bracing, two
intermediate vertical braces and one intermediate horizontal brace, double
acting design with long chains and two sets of banjo eyes and full width lower
tailgate pin.
- Tailgate Hardware:
Heavy duty cast "tarp friendly" top hardware and cast overshot lower hardware
and manual release handle.
- Lights:
Meets all requirements of FMVSS108 with oval stop/tail/turn lights recessed in
rear posts. All lighting is recessed, shock mounted, complete with factory
wiring harness.
- Understructure:
10" formed trapezoid longitudinal, 3/16", 100K PSI yield, lubricated front and
rear cross shafts and 3/16" full width rear bolster.
- Safety Features:
All Galion 453U bodies are shipped with a "body up" warning light and OSHA
required back up alarm.
'
The Galion 533U's lighter crossmemberless construction makes
it an excellent choice for over-the highway aggregate hauling. Ideal for
construction, batching work, and spreading stone, sand, gravel and other
aggregates. Designed for medium to heavy duty work, The 533U series body uses
high tensile stainless steel throughout for best resistance to abrasion.
Specifications
- General Dimensions:
Available in 11' through 17' inside lengths, in 1' increments with an 84"
inside width. 11' and 12' bodies available with 33" sides and 43" ends. 13'
through 17' bodies available with 43" sides and 53" ends or 48" sides and 56"
ends.
- Sides:
10 gauge stainless steel with material shedding boxed top rails, full depth
15" rear corner post, formed "V" horizontal bracing, 10" front and rear board
extension pockets and full length tarp rails.
- Floor:
3/16" AR 450 Hardox steel with 2" floor to side radius.
- Front Bulkhead:
10 gauge stainless steel construction with two bend top flange and two
vertical structural angle reinforcements.
- Tailgate:
7 gauge stainless steel, 6 panel design with fully perimeter box bracing, two
intermediate vertical braces and one intermediate horizontal brace and full
width lower tailgate pin.
- Tailgate Hardware:
Heavy duty all stainless cast "tarp friendly" top hardware and cast overshot
lower hardware and manual release handle.
- Lights:
Meets all requirements of FMVSS108 with oval stop/tail/turn lights recessed in
rear post. All lighting is recessed, shock mounted, complete with factory
wiring harness.
- Understructure:
Crossmemberless design using 3/16" X 100K formed 11" trapezoidal longbeams.
Lubricated front and rear cross shafts and full width rear bolster.
- Safety Features:
All Galion 533U bodies are shipped with a “body up" warning light and OSHA
required back up alarm.
The Galion 533U's lighter crossmemberless construction makes
it an excellent choice for over-the highway aggregate hauling. Ideal for
construction, batching work, and spreading stone, sand, gravel and other
aggregates. Designed for medium to heavy duty work, The 533U series body uses
high tensile stainless steel throughout for best resistance to abrasion.
Specifications
- General Dimensions:
Available in 11' through 17' inside lengths, in 1' increments with an 84"
inside width. 11' and 12' bodies available with 33" sides and 43" ends. 13'
through 17' bodies available with 43" sides and 53" ends or 48" sides and 56"
ends.
- Sides:
10 gauge high tensile steel with material shedding boxed top rails, full depth
15" rear corner post, pressed "V" braces, 10" front and rear board extension
pockets and full length tarp rails.
- Floor:
3/16" AR 450 Hardox steel with 2" floor to side radius.
- Front Bulkhead:
10 gauge high tensile steel construction with two bend top flange and two
vertical structural angle reinforcements.
- Tailgate:
7 gauge high tensile steel, 6 panel design with fully perimeter box bracing,
two intermediate vertical braces and one intermediate horizontal brace and
full width lower tailgate pin.
- Tailgate Hardware:
Heavy duty all stainless cast "tarp friendly" top hardware and cast overshot
lower hardware and manual release handle.
- Lights:
Meets all requirements of FMVSS108 with oval stop/tail/turn lights recessed in
rear post. All lighting is recessed, shock mounted, complete with factory
wiring harness.
- Understructure:
Crossmemberless design using 3/16" X 100K formed 10" trapezoidal longbeams.
Lubricated front and rear cross shafts and full width rear bolster.
- Safety Features:
All Galion 533U bodies are shipped with a "body up" warning light and OSHA
required back up alarm.
Contact
us for more information.
Mapquest can give the directions to you
click
here to go to Mapquest site.
|