Galion Steel Bodies

 

The Galion 100U body is designed for superior service on 9900 -19500 GVWR cab/chassis'. The 100U features all 10 gauge high tensile steel floors, tailgate, head sheets and sides. Front corner posts, two intermediate side braces, full depth rear corner posts and boxed "material shedding" top rails are also standard.

Specifications

  • General Dimensions:
    Available in inside lengths from 8' through 11'-6", 84" inside width with 13" sides and 19" gate or 18" sides and 24" gate.
  • Sides:
    10 Gauge high tensile steel with material shedding boxed top rails, full depth 10" rear corner post, front side brace, two intermediate vertical side braces and 6" front and rear board extension pockets.
  • Floor:
    10 gauge high tensile steel, with 2" radius floor to side radius.
  • Front Bulkhead:
    10 gauge high tensile steel construction with two bend top flange.
  • Tailgate:
    Heavy duty cast quick release top hardware and cast overshot lower hardware with manual release handle.
  • Tailgate Hardware:
    Heavy duty all stainless cast "tarp friendly" top hardware and cast overshot lower hardware and manual release handle.
  • Lights:
    Meets all requirements of FMVSS108 with oval stop/tail/turn lights recessed in rear post. All lighting is recessed, shock mounted, complete with factory wiring harness.
  • Understructure:
    Stacked design utilizing 6" structural longitudinals gusseted to 3" structural channel crossmembers on 12" centers, lubricated front and rear cross shaft and full width rear bolster.
  • Safety Features:
    All Galion 100U bodies are shipped with a "body up" warning light and OSHA required back up alarm.
  • Paint:
    Glossy black thermoset powder coating on top of thermoset Zinc powder coat primer.

The Galion 130U body is designed for superior service on 9900 - 19500 GVWR cab/chassis'. This bodies feature a 3/16" high tensile steel floor, 10 gauge high tensile tailgate, head sheets and sides. Front corner posts, smooth sides, full depth rear corner posts, crossmemberless understructure, and boxed "material-shedding" top rails are also standard.

Specifications
  • General Dimensions:
    Available in inside lengths from 8' through 11'-6", 84" inside width with 13" sides and 19" gate or 18" sides and 24" gate.
  • Sides:
    10 Gauge high tensile steel with material shedding boxed top rails, full depth 10" rear corner post and low drag smooth design.
  • Floor:
    3/16" high tensile steel 1 pc with 2" formed in place floor to side radius.
  • Front Bulkhead:
    10 gauge high tensile steel construction with two bend top flange.
  • Tailgate:
    10 gauge high tensile steel. 1 panel design with full perimeter box bracing, double acting design with long chains and two sets of banjo eyes.
  • Tailgate Hardware:
    Heavy duty cast quick release top hardware and cast overshot lower hardware with manual release handle.
  • Lights:
    Meets all requirements of FMVSS108 with oval stop/tail/turn lights recessed in rear post. All lighting is recessed, shock mounted, complete with factory wiring harness.
  • Understructure:
    Crossmemberless design using 3/16" X 100K steel formed into 5" trapeziod longbeams. Lubricated front and rear cross shafts and full width rear bolster.
  • Safety Features:
    All complete Galion 130U bodies are shipped with a "body up" warning light and OSHA required back up alarm.
  • Paint:
    Glossy black thermoset powder coating on top of thermoset Zinc powder coat primer.

The Galion PLD body is designed for superior service on 12000 - 26000 GVWR cab/chassis'. It features all 10 gauge high tensile steel floors, tailgate, head sheets and single V brace sides. 10" full depth rear corner posts and boxed "material-shedding" top rails are also standard. The PLD is designed to operate with scissor type conversion hoists.

Specifications
  • General Dimensions:
    Available in inside lengths of 12', 14' and 16" inside width with 18" sides, 42" front and 24" gate.
  • Sides:
    10 Gauge high tensile steel sides with horizontal pressed V brace, material shedding boxed top rails, full depth 10" rear corner post and 6" front and rear board extension pockets. Drop sides do not have pressed V brace.
  • Floor:
    10 gauge high tensile steel, with 2" radius floor to side radius.
  • Front Bulkhead:
    10 gauge high tensile steel construction with two bend top flange and horizontal V brace.
  • Tailgate:
    10 gauge high tensile steel with full perimeter box bracing, two intermediate vertical box braces, double acting with long chains and two sets of banjo eyes.
  • Tailgate Hardware:
    Heavy duty cast quick release top hardware and cast overshot lower hardware with manual release handle.
  • Lights:
    Meets all requirements of FMVSS108 with oval stop/tail/turn lights recessed in rear post. All lighting is recessed, shock mounted, complete with factory wiring harness.
  • Understructure:
    Stacked design utilizing 7" structural longitudinals gusseted to 3" structural channel crossmembers on 12" centers, lubricated front and rear cross shaft and full width rear bolster.
  • Safety Features:
    All complete Galion PLD bodies are shipped with a "body up" warning light and OSHA required back up alarm.
  • Paint:
    Glossy black thermoset powder coating on top of thermoset Zinc powder coat primer.

The Galion 400U smooth side body is especially designed for heavy-duty hauling requirements. It is well-suited for construction work, aggregate hauling and bucket loading. All units are built of tough high tensile steel to virtually outlast and outperform all others. Recommended for single axle underbody hoist applications.

Specifications
  • General Dimensions:
    Available in 10' inside length, 86" inside width, 26" sides, 32" or 36" ends.
  • Sides:
    8 gauge high tensile steel with material shedding boxed top rails, full depth 15" rear corner post, one intermediate, formed in place horizontal "V" brace, 6" or 10" front and rear board extension pockets and full length tarp rails.
  • Floor:
    8 gauge high tensile steel with 9" floor to side radius.
  • Front Bulkhead:
    8 gauge high tensile steel construction with two bend top flange and one formed in place intermediate "V" brace.
  • Tailgate:
    8 gauge high tensile steel, 6 panel design with full perimeter box bracing, two intermediate vertical braces and one intermediate horizontal brace, double acting design with long chains and two sets of banjo eyes and full width lower tailgate pin.
  • Tailgate Hardware:
    Heavy duty cast "tarp friendly" top hardware and cast overshot lower hardware and manual release handle.
  • Lights:
    Meets all requirements of FMVSS108 with oval stop/tail/turn lights recessed in rear post. All lighting is recessed, shock mounted, complete with factory wiring harness.
  • Understructure:
    Stacked design utilizing 6" structural lonitudinals gusseted to 4" structural channel crossmembers on 12" centers, lubricated front and rear cross shafts and full width rear bolster.
  • Safety Features:
    All Galion 400U Smooth Side bodies are shipped with a "body up" warninglight and OSHA required back up alarm.
  • Paint:
    Glossy black thermoset powder coating on top of thermoset Zinc powder coat primer.

The rugged design of the Galion 400U/T series body makes it ideal for heavy loading and hauling conditions. This product is suitable for contractor, municipal and other applications where durability is key. The 400U/T series is available with front mount telescopic or underbody hoist to meet your most demanding requirements.

Specifications
  • General Dimensions:
    Available in 9' and 10' inside lengths, 84" inside width, standard side heights of 24",26" and 30" with 10" higher ends.
  • Sides:
    8 gauge high tensile steel with material shedding boxed top rails, full depth 15" rear corner post, 3 intermediate vertical side braces, 10" front and rear board extension pockets and full length tarp rails.
  • Floor:
    8 gauge high tensile steel with 2" floor to side radius.
  • Front Bulkhead:
    8 gauge high tensile steel construction with two bend top flange and one formed in place intermediate "V" brace.
  • Tailgate:
    8 gauge high tensile steel, 6 panel design with full perimeter box bracing, two intermediate vertical braces and one intermediate horizontal brace, double acting design with long chains and two sets of banjo eyes and full width lower tailgate pin.
  • Tailgate Hardware:
    Heavy duty cast "tarp friendly" top hardware and overshot lower hardware and manual release handle.
  • Lights:
    Meets all requirements of FMVSS108 with oval stop/tail/turn lights recessed in rear corner posts. All lighting is recessed, shock mounted, complete with factory wiring harness.
  • Understructure:
    Stacked design utilizing 6" structural longitudinals gusseted to 4" structural channel crossmembers on 12" centers, lubricated front and rear cross shafts and full width rear bolster.
  • Safety Features:
    All Galion 400U/T bodies are shipped with a "body up" warning light and OSHA required back up alarm.
  • Paint:
    Glossy black thermoset powder coating on top of thermoset Zinc powder coat primer.

The Galion 450U is a heavy duty body that "beats the cold" during low temperature use with integral heat ducts. The 450U is well suited for aggregate hauling/spreading, construction and batching work...at any time of the year, anywhere on the globe! This heavy duty body features full depth rear corner posts and bolster, a 6-panel tailgate and continuous weld throughout.

Specifications
  • Sides:
    10 gauge 100k PSI yield steel with material shedding boxed top, full depth 15" rear corner post, three intermediate vertical side braces, 10" front and rear board extension pockets and full length tarp rails.
  • Floor:
    3/16", PL 400BHN steel with 2" floor to side radius.
  • Front Bulkhead:
    8 gauge high tensile steel construction with two bend top flange and one formed in place intermediate “V" brace.
  • Tailgate:
    8 gauge high tensile steel, 6 panel design with full perimeter box bracing, two intermediate vertical braces and one intermediate horizontal brace, double acting design with long chains and two sets of banjo eyes and full width lower tailgate pin.
  • Tailgate Hardware:
    Heavy duty cast “tarp friendly" top hardware and cast overshot lower hardware and manual release handle.
  • Lights:
    Meets all requirements of FMVSS108 with oval stop/tail/turn lights recessed in rear posts. All lighting is recessed, shock mounted, complete with factory wiring harness.
  • Understructure:
    10" formed trapezoid longitudinal, 3/16", 100K PSI yield with heat tunnels front and rear of body, lubricated front and rear cross shafts and 3/16" full width rear bolster.
  • Safety Features:
    All Galion 450U bodies are shipped with a “body up" warning light and OSHA required back up alarm.
  • Paint:
    Glossy black thermoset powder coating on top of thermoset Zinc powder coat primer.

The Galion 500U/T is excellent for over-the highway aggregate hauling. It is also Ideal for construction and batching work, and for hauling and spreading stone, sand, gravel and other aggregates. Galion 500U/T series bodies utilize high tensile steel throughout for best resistance to abrasion. The Galion 500U/T is the largest of Galion's steel body product line, and can be used with underbody and telescopic hoists.

Specifications
  • General Dimensions:
    Available in 12’ through 17’ inside lengths, in 1’ increments with an 84” inside width.12’ bodies available with 33” sides and 43” ends. 13’ through 17’ bodies available with 43” sides and 53” ends or 48”sides and 58” ends.
  • Sides:
    10 gauge high tensile steel with material shedding boxed top rails, full depth 15” rear corner post, vertical side braces, 10” front and rear board extension pockets, and full length tarp rails.
  • Floor:
    8 gauge high tensile steel with 2" floor to side radius.
  • Front Bulkhead:
    10 gauge high tensile steel construction with two bend top flange and horizontal pressed V reinforcements.
  • Tailgate:
    8 gauge high tensile steel, 6 panel design with fully perimeter box bracing, two intermediate vertical braces and one intermediate horizontal brace and full width lower tailgate pin.
  • Tailgate Hardware:
    Heavy duty cast "tarp friendly" top hardware and cast overshot lower hardware and manual release handle.
  • Lights:
    Meets all requirements of FMVSS108 with oval stop/tail/turn lights recessed in rear post. All lighting is recessed, shock mounted, complete with factory wiring harness.
  • Understructure:
    Stacked design utilizing 7" structural longitudinals gusseted to 4" structural channel crossmembers on 12" centers, lubricated front and rear cross shafts and full width rear bolster.
  • Safety Features:
    All Galion 500U/T bodies are shipped with a "body up" warning light and OSHA required back up alarm.

Contact us for more information.

 

Mapquest can give the directions to you click here to go to Mapquest site.

 

Web site designed and maintained by G & E Web Design